Customize your Camaro Engine bay with our new and unique factory plenum cover that has been designed to expose the factory plenum, after removing the factory shroud, allowing you to custom paint or to chrome plate it for a truly custom look.The all new Plenum Cover and fuel rail cover/coil pack covers have been designed to easily attach to the factory fuel rails of the 2010 LS3 engine via two attachment bolts on each side of the engine supplied with the kit.Features:    * Made from the finest 304 Stainless Steel.
    * Includes everything to install.
    * Available in Brushed or Polished finish.
    * Illuminated with LED as shown.

Customize your Camaro Engine bay with our new and unique factory Perforated Plenum Cover that has been designed to expose the factory plenum, after removing the factory shroud, allowing you to custom paint or to chrome plate it for a truly custom look.The all new Perforated Plenum Cover and fuel rail cover/coil pack covers have been designed to easily attach to the factory fuel rails of the 2010 LS3 engine via two attachment bolts on each side of the engine supplied with the kit. Features:    * Made from the finest 304 Stainless Steel.
    * Includes everything to install.
    * Illuminated with LED as shown.

Customize your Camaro Engine bay with our new and unique factory plenum cover that has been designed to expose the factory plenum, after removing the factory shroud, allowing you to custom paint or to chrome plate it for a truly custom look.The all new Plenum Cover and fuel rail cover/coil pack covers have been designed to easily attach to the factory fuel rails of the 2010 LS3 engine via two attachment bolts on each side of the engine supplied with the kit.Features:    * Made from the finest 304 Stainless Steel.
    * Includes everything to install.
    * Available in Brushed or Polished finish.
    * Illuminated with LED as shown.

Customize your Camaro Engine bay with our new and unique factory plenum cover that has been designed to expose the factory plenum, after removing the factory shroud, allowing you to custom paint or to chrome plate it for a truly custom look.The all new Plenum Cover and fuel rail cover/coil pack covers have been designed to easily attach to the factory fuel rails of the 2010 LS3 engine via two attachment bolts on each side of the engine supplied with the kit.Features:    * Made from the finest 304 Stainless Steel.
    * Includes everything to install.
    * Available in Brushed or Polished finish.
    * Illuminated with LED as shown.

L99 Camaro owners can add performance and style to their cars with new shifter from Hurst. Tthe 2010+ Camaro Plate kit from Hurst that replaces the factory automatic transmission console plate with a CNC-machined 6061-T6 billet aluminum plate, mil-spec anodized black with cutouts on both sides for the gear indicator. The matching Hard Drive stick body is polished to a mirror shine, while the top handle is available with either a titanium-anodized contrasting finish, or a brushed aluminum finish that can be left as-is, or polished, painted, or anodized for a custom look. It’s simple to install and requires no modification to the stock console.NOTE: We are currently taking per-orders. This item will ship in Feb. 2011. Place your pre-order now, the line to get these new Hurst shifters has already formed.

SLP Performance BLACKWING Cold-Air Induction System This new Blackwing system was designed from the ground-up to maximize air-flow, lower intake air temperatures and produce substantial horsepower and torque gains by incorporating many design features not found in typical cold-air kits. All SLP Blackwing systems are designed in 3D CAD (Computer Aided Design), enabling SLP to run CFD (Computational Fluid Dynamic) analysis optimizing the design. Once established in CAD, we flow bench, dyno and road test prior to releasing the final cold air system.
Each induction system includes a high-flow OEM quality, black- finished polypropylene upper intake tube with a raised SLP Blackwing logo, an integrated MAF housing tube, and a new lower intake tube. 
This connects to a new high-flow reusable SLP Blackwing air-filter replacing the restrictive, power robbing factory assembly. This setup increases the flow rate of air providing up to a 15 horsepower gain. 
Includes a unique SLP washer fluid reservoir which holds just under a gallon of fluid. All necessary hardware, upper/lower tubes/filter/ washer container and detailed installation instructions included.

Fits 2010 Camaro
Dress up your 2010 Camaro with this easy to install 4pc Polished Stainless Wiper Cowl. Made from #8 304 Polished Stainless, it will never tarnish, rust or pit.

These magnets can save your engine, by pulling out tiny metal particles before they recirculate through your engine. Package comes with oil filter magnet and magnetic oil drain plug.

Fuel Rails, Billet Aluminum, Red Anodized, Chevy, Corvette, 6.2L, Pair Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. •• Fits 2005-2006 GM LS2 - Rails Only
• ORB-08 Ports with compact connections and positive, leak-free sealing.
• Full 5/8” ID through bore, capable of supporting up to 3,000 HP.
• Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641.
• Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation.
• Additional inlet/outlet ports are provided where required for plumbing convenience.
• CNC-machined, billet aluminum construction for unequaled fit and finish.
• Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of  nstallation.
• Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions

Fuel Rails, Billet Aluminum, Red Anodized, Chevy, Corvette, 6.2L, Pair Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with “bolt-on” ease of installation. • Fits GM LS3/L76 - Rails Only
• ORB-08 Ports with compact connections and positive, leak-free sealing.
• Full 5/8” ID through bore, capable of supporting up to 3,000 HP.
• Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641.
• Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation.
• Additional inlet/outlet ports are provided where required for plumbing convenience.
• CNC-machined, billet aluminum construction for unequaled fit and finish.
• Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and “bolt-on” ease of  nstallation.
• Red, Type II bright dip anodized finish that looks great and protects against corrosion. Download Installation Instructions